Machine Sentry Fixed MSF-2

Machine Sentry Fixed MSF-2 is a triaxial vibration and temperature sensor from AVT Reliability® and has an improved battery life, frequency range, data transfer speed and memory.

The MSF2 can be used on a wide range of equipment, including compressors, pumps and motors as part of a condition monitoring programme. Parameters are measured in real time so any potential issues can be detected before they become failures. If an abnormality is identified, an alert is triggered.

To collect essential vibration and temperature data, the MSF-2 sensor can be placed on structures and machinery wherever they are needed. Being wireless means that the sensor can be fitted in locations that would normally be difficult to monitor with a wired device. The Machine Sentry Fixed MSF-2 sensor can be temporarily installed using an optional magnetic attachment or mounted permanently for semi-continuous or continuous monitoring of your machinery.

Using Bluetooth®, collected measurements can be downloaded and viewed by pairing the sensor with a handheld Android device. Alternatively, over 100 sensors can be safely connected using Machine Sentry® Gateway, and the data is collected and uploaded directly to the Machine Sentry® database to create a unique asset reliability solution.

  • Frequency range of 1Hz to 8.5kHz
  • Internal memory large enough to store more than 5000 readings
  • High-speed data transfer via Bluetooth®
  • Programmable data acquisition
  • Replaceable battery
  • Up to 5 years battery life
  • Gas zone 0 and dust zone 20 certified
  • Sealed to IP 67
ATEX CERTIFICATION
Certified To EN IEC 60079-0: 2018 and EN 60079-11: 2012
II 1 GEx ia IIC T4 Ga Ta= -20°C to +60°C
II 1 D Ex ia IIC T135°C Da Ta= -20°C to +60°C
  CML 22ATEX2395X
UKEX Certification
Certified To EN IEC 60079-0: 2018 and EN 60079-11: 2012
II 1 G Ex ia IIC T4 Ga Ta= -20°C to +60°C
II 1 D Ex ia IIC T135°C Da Ta= -20°C to +60°C
CML 22UKEX2396X
IECEx Certification
Standards IEC 60079-0:2017 | IEC 60079-11:2011
Type of protection Intrinsic Safety Ex “ia”
Marking Ex ia IIC T4 Ga | Ex ia IIIC T135°C Da
Cert IECEx CML 22.0054X
 
Hazloc Certification
  Class I and II Division 1 Grps A-G T4
  Class II Division 1 Grps A-G T135°C
  Class I Zone 0  AEx ia IIC T4 Ga
  Class II Zone 20  AEx ia IIIC T135°C Da
 
Machine Sentry Fixed MSF-2 Brochure Download
Westpower Condition Monitoring Line Card Download